Sunday, October 18, 2009

How To Make Cold Porceline Flowers???

Same As Soap Flower.

Try this too..

More realistic flowers...

you will say wow....

What you'll need:

3/4 cup white glue
1/2 cup water
1 teaspoon cold cream (such as Pond's)
1 teaspoon glycerin
1 cup cornstarch, plus additional for dusting your hands


Assemble all your ingredients before you begin. If you have trouble finding glycerin, try a drugstore's skin care aisle, or a cake-decorating store.

If possible, use an old saucepan and spoon for this process. The ingredients in cold porcelain aren't toxic, but they can be sticky, so don't use your best utensils!

For Detailed Tutorial visit

http://www.craftstylish.com/item/2802/how-to-make-cold-porcelain


Saturday, October 17, 2009

Embroidary Patterns- Corners




Embroidary Patterns





Embroidary Patterns





Embroidary Patterns



Friday, October 16, 2009

Embroidary Patterns



Stained Santa Claus Pattern

butterflies and Flowers





How To Make Quilt???

Quilting is a fun and practical way to pass time. You can be as creative as you like, but you will finish with a blanket to keep you warm at night and pass down to your children or grandchildren. However, it can be a long and labor intensive process, so be prepared!

Steps

  1. Choose a pattern and fabric. You can look online for free quilt block patterns by using a search engine. You can also look in books or talk to people who you know that have made quilts. Selecting your pattern may affect what fabric you would like to use, or vice versa. A whimsical pattern of animals or flowers might look better in bright solid colors, or a quilt of your old baby clothing might look better in a more traditional pattern.
  2. Some quilters like to pre-wash fabrics and say that this prevents colour runs and takes care of any shrinking. Others prefer not washing fabric, since it can be easier to cut and lets you get started more quickly. Either way, treat all your fabric the same -- wash it all or don't wash it all. If you opt not to wash, you may want to test a small amount for color fastness by putting a snip in warm water and seeing if it runs. If it does, you'll need to wash it to get the extra dye out.
  3. Cut out your pattern. This is a very important step. You need to be very precise. It you don't cut the pieces right, the quilt block won't line up correctly. The best way to get an accurate cut is with a rotary cutter, a self-healing mat, and a quilter's ruler. These make all the difference in the world.
  4. Sew each block together using a 1/4" seam allowance. You can mark your sewing maching throat plate with a piece of masking tape to ensure that your 1/4" seam allowance is accurate. Some machines have a quarter inch foot that makes this easy. Most patterns will come with directions, telling you how to piece the pieces together. Usually, though, you want to put the pieces together so that you are always sewing a straight line. It is difficult to sew around corners. More advanced techniques such as appliqué, where you fold the edges under to sew a curvy piece on top of the block, should wait until at least your second quilt.
  5. Once you have all the blocks made (how many you make will depend on how big they are and how big of a quilt you want to make) you should decide if you would like to put borders on the quilt. Many quilts have strips of fabric around all of the blocks as well as a border or two or three around the outside edge. This is a great way to make up square footage on the quilt if you didn't feel like making up enough blocks for the entire size that you want. Cut long strips of fabric and sew them to the blocks, once again trying to always sew only straight lines. Use these strips to sew all of the blocks together until you have one large piece. Then sew the outside border pieces on.
  6. Select your batting. Batting comes in several different shapes and types. High loft batting is thicker and will make a "poofier" quilt. Low loft batting is thinner and may be easier to quilt, but it won't be as warm. There is also fusible batting, it can be ironed to the top and bottom pieces, sticking to both, so you won't have to baste.
  7. Select your backing material. This is usually a large piece of solid fabric. If you are making a large quilt, you may need to piece together full widths of fabric, since fabric usually comes in 45" or 60" widths and a queen size quilt may be 66" square. If you would like to use the backing material to edge the quilt, make sure the fabric is a couple of inches too big in every direction.
  8. Baste the three layers (top, batting, backing) together. If you bought fusible batting, you will just need to iron the three layers. But, if you bought regular batting, you should lay out the three layers on top of each other, select a contrasting thread (so you can remove it easily later) and sew the three layers together. Start in the middle and work your way out in each direction, smoothing out any wrinkles as you go. A great substitute to basting is using safety pins. Put them every 3-4", starting at the center.
  9. Once all the layers are together, you need to use a matching thread, or contrasting if you like the look, and sew the layers together. Start from the middle and work your way out, trying to use small, even stitches. You will get better as you practice, and no one will ever notice if you are a little messy. The quilt block pattern may have included quilting directions. If it didn't, you usually just "stitch in the ditch." This means you follow all of the seams in the quilt block and borders, keeping your stitching about a quarter of an inch away from the seam. You might also ask at your local quilt shop for someone who does machine quilting. You give them the top, batting and back and they'll quilt it for you on a long-arm machine. You'll still need to put the binding on (see below).
  10. Remove the basting (if necessary) and finish the edges of the quilt. You should trim all of the layers so that they are the same on the edges (if you want to use the backing fabric, just trim it so that it is an even inch and a half longer than the other layers all the way around). You can buy bias tape to sew along the edges. This you will sew lengthwise on one side all along the edges, then wrap it around to the other side and sew again. Or you can use the backing fabric, just fold in the raw edge, fold it over to the top of the quilt, and sew it down all the way around. With either method, take your time on the corners, as they are a little tricky. Just keep messing with them, folding in the extra fabric, until they look good.
  11. If you would like, you can sign the corner of the backside of the quilt with the date and your name. You can also include the name of the pattern or who the quilt is intended for if you would like. Write lightly with an ink that won't wash out.

[edit]Tips

  • Try to buy all of the fabric for the top before you get started. This will keep you from running out in the middle and having to improvise. Also, it will help you make sure that all of the fabrics will go together.
  • If you would like to use stretchy fabric (like old t-shirts) there is a product that you can buy to iron onto the fabric to keep it from stretching. Don't try to quilt with stretchy fabric.
  • Muslin is a great choice for backing fabric. It comes in wider widths, so you won't have to piece it together, and it is all cotton, so you can easily dye it to match your quilt's theme.
  • When quilting, a quilting frame is very helpful. It is basically a large embroidery hoop that sits on a stand. It will keep the fabric taut, so you don't sew in wrinkles, and it will hold it at about lap level. After several hours of quilting, your quilt will seem very heavy.
  • When hand quilting, a neat trick is to pop the knots into the batting. As you reach the end of a piece of thread, or a section of quilting, use the needle to tie a knot close to the surface of the fabric. Then, pull the needle through the quilt one more time. When you feel the knot reach the surface of the fabric, tug sharply, and the knot will "pop" into the fabric. You can then trim the thread close to the surface of the fabric without worrying that it will come undone.
  • You may want to practice on a smaller quilt before starting a huge one.

Things You'll Need

  • Fabric for quilt top
  • Quilt block patterns
  • Batting
  • Fabric for back of quilt
  • Thread (cotton)
  • Hand sewing needles if piecing the top by hand
  • Quilting needles if quilting by hand
  • Cardboard for making stencil and tailor's chalk
  • Bias tape
  • Quilting frame
  • Lots of time
  • Rotary cutter
  • Cutting Board
  • Ruler
  • Pencil
  • Long pins
  • Pin cushion
  • Seam ripper




Quilt Pattern

Download this pattern from here

Quilt




Quilting is a sewing method done either by hand, by sewing machine, or by a longarm quilting system. A person who takes on quilting as an occupation is called a quilter.

The process of quilting uses a needle and thread to join two or more layers of material together to make a quilt. Typical quilting is done with three layers: the top fabric or quilt top, batting or insulating material and backing material. The quilter's hand or sewing machine passes the needle and thread through all layers and then brings the needle back up. The process is repeated across the entire piece where quilting is wanted. A straight or running stitch is commonly used and these stitches can be purely functional or decorative and elaborate. Quilting is done on bed spreads, art quilt wall hangings, clothing, and a variety of textile products. Quilting can make a project thick, or with dense quilting, can raise one area so that another stands out.

Colouring pages



Colouring pages




Princess


Colouring pages



Graceful Ladies


Colouring pages


Thursday, October 15, 2009

Empty Your Coffee Cup- Coffee Painting




Hi Friends....
Here I add some of the coffee painting samples that i ve collected in net.

Will try my own soon...

Happy Diwali....

Graceful Ladies